| Description: 862FAD12 |
A horizontal winder to wrap products with a maximum width of 61” and a minimum of 24” in length. Fully-Automatic variable speed wrapping ring with dual 12” Kalamazoo variable tension film delivery , automatic film starting and cutting, air powered product hold downs. NEMA 12 enclosure with disconnect. All KPS Horizontal Winders are fully guarded with expanded metal.
|
| Horizontal Winder: |
- 3 hp. 480/3/60hz. VAC variable speed motor with a right angle gear reducer.
|
- AC Solid state variable speed motor controller
|
-
0-29.5 RPM, friction wheel drive
|
-
Floor to center of ring . 52.0”
|
| Film Applicator: |
- 12 ” Dual Kalamazoo Variable Tension Film Delivery
|
Power Requirements:
|
- 480/3/60 30A (This system is supplied with solid state AC drives, PLC, and sensors. A clean power source must be supplied to the system without voltage spikes or drops.)
|
| Air Requirements: |
- 80 psi ( Air must be clean and dry)
|
