You will have 2 staging conveyors loading our pop-up conveyors. We will control the on/off operation of those conveyors. When a product gets to the photo-eye on your conveyor it tells our system a window is ready. The window is then fed onto a pop-up conveyor. When the window comes on to the pop-up conveyor, it is moved toward the roller conveyor and staged. When the winder is ready for the window, the pop-up conveyor is lifted and the window is measured as it is moved onto the center of the roller conveyor. The pop-up conveyor lowers, completing the transfer. Then the roller conveyor feeds the product on to the input conveyor. When the product leaves the roller conveyor the machine accepts the next window that is staged and ready from one of the pop-up conveyors. The window we just placed on the input conveyor is now in the winder to be wrapped. The Winder ring will come on and apply the reinforcing wraps to the front edge of the product and the conveyors will turn on and wrap the product. After the product is wrapped the winder will apply the reinforcing wraps to the tail edge of the product and automatically cut the film. The output conveyor will turn on and move the product out of the Winder. End of cycle.
