Packaging Solutions Since 1978

Low profile turntable with variable speed drive, auto-stop positioning, 48″ diameter round table top, safety tread surface, window/panel fixture. Pockets in frame for fork truck portability. Semi-automatic spiral film applicator with 30” capacity variable tension film delivery system, PLC programmable controller in NEMA 12 enclosure. Pushbuttons are mounted in a swing away console. Automatic load height sensor and adjustable top over wrap. Limit switches slide in track for manual wrap pattern adjustment. Top platen load stabilizer with fixture for window/panel thicknesses as specified by customer. Click the Tabs below for further information.

Floor Layout Operators Manual Video

Capability
  • Maximum Height = 96″
  • Maximum Width = 66″
  • Thickness = Thickest window/ panel plus 1/2″
Construction
  • Turntable:
    • 3/8” steel floor plate, 48” diameter
    • 2-7/8” height form floor.
  • Frame:
    • Structural tube, plate and bar, meet ASTM-A36 or ASTM-A500
    • Fork pockets for in plant movement.
  • Mast:
    • Structural tube, plate and bar, meet ASTM-A36 or ASTM-A500
FILM DELIVERY SYSTEM – KALAMAZOO VARIABLE TENSION Compatibility
  • All commercial stretch films.
  • Adjustable, independent of film roll diameter. Film tension start delay.
  • 10” diameter, 30” web
  Wrap Operation Normal Start Position:
  • Film Lift – DOWN
  • Platen – UP
  1. Operator slides lower fixture to slightly less than the product width, centering on turntable, then sets product on fixture. Position top of product under upper fixture and lower top fixture (platen) to stabilize product.
  2. Operator applies edge protectors as required and attaches film to product by tucking between product and lower fixture.
  3. Move clear of turntable.
  4. Operator starts wrap cycle.
  5. When system has completed its automatic wrap cycle, the operator cuts the film.
  6. Raise the platen and remove product.
Description of Automatic Wrap Cycle
  • Operator initiates the wrap cycle by pushing the ‘START’ button
  1. Turntable starts.
  2. Film tension comes on gradually.
  3. After bottom reinforcing wraps, the film carriage starts up and travels to the top of product.
  4. Film carriage stops and places the reinforcing wrap on the top.
  5. Film carriage returns to the bottom, the system will decelerate and index to the home position.
Drives
  • Turntable:
    • 1/2 hp. 2.3 amp. AC variable speed motor with solid state Telemecanique AC Drive controller and inline reducer. #50 chain drive 0-16 RPM
  • Film Lift:
    • 1/2 hp. 2.3 amp. AC variable speed motor with solid state Telemecanique AC Drive controller and right angle gear reducer. #50 chain drive.
  • Platen:
    • 1/2 hp. 2.3 amp. AC variable speed motor with solid state Telemecanique AC drive controller and right angle gear reducer. #50 chain drive.
  • Film Tension:
    • 16 ft/lb. 90v DC brake with electronic controller
Electrical Data
  • 110/1/60 15 amp. *Optional voltage 230/1/60 10 amp. 230/3/60 10 amp. or 480/3/60 8 amp.
  • 30” Powered prestretch film delivery
  • Turntable Disc Brake
  • Extra Height (120”)Allen Bradley Micrologix PLC and Drives
  • The remote console will be mounted to the Safety Rail.
  • System to be used as a pallet stretch wrapper:
    1. Banner Photo-eye Load Height Sensor.
    2. 2-Position selector for Window/Pallet.
    3. Quick removal bottom fixture.
  • Ramp
  • 4,000 lbs. Built In Scale
  • Printer w/ 2”x 4” labels 140 per roll. ( 1 case 10 rolls)
  • System to be used as a pallet stretch wrapper:
    • Banner Photo-eye Load Height Sensor.
    • 2-Position selector for Window/Pallet.
    • Quick removal bottom fixture.
  • Perimeter Safety Rail to surround machine with a 70” Long Swing out gate with a safety switch.
  • 6”x 46” Polyurethane Covered Gravity roller conveyor with manual roller lock.
  • 12”x 46” Polyurethane Covered Gravity roller conveyor with manual roller lock.
  • 18”x 46” Polyurethane Covered Gravity roller conveyor with manual roller lock.
  • Power requirements 230/3/60 10 amp.
  • Power requirements 480/3/60 8 amp.
  • Crating (shipping by common carrier)
  • Delivery and Set-up
<!– Video Here –!>