Packaging Solutions Since 1978

A horizontal winder to wrap products with a maximum width of 91” and a minimum of 36” in length. Foot or selector switch operated variable speed wrapping ring with a 10-12” Kalamazoo variable tension film delivery and manual adjustable product hold downs


Horizontal Winder:
  • 5 hp. AC variable speed motor with Right Angle Gear Reducer
  • AC Solid State variable Speed Motor Controller
  • 0 – 28.5 RPM Friction Wheel Drive
  • 10 – 12″ Kalamazoo Variable Tension Film Delivery
Drives:
  • 5 hp. 230/3/60 Hz. AC Controller
  • Power Requirements: 230/3/60 Hz. 20a
All KPS Horizontal Winders are fully guarded with expanded metal
890PM Powered Manual
Wrap Cycle: Place the product onto the in feed conveyor and/or slide table. Move the product into the Winder. Secure the film and push down on the foot switch or turn the Winder selector switch to on. After the reinforcing wraps are applied to the front edge of the product turn on the conveyors or slide product through the Winder. Place the reinforcing wraps to the tail end of the product. Let off on the foot switch or turn off the Winder selector switch. the operator will now cut and secure the film. End of Cycle
  • Manually Adjustable Product Hold Downs
  • Manually operated Powered in feed belted conveyor
  • Manually operated Powered output belted conveyor
Available Options:
  • 20″ Variable tension film delivery
  • Product Hold downs
  • Air powered Product hold downs
  • Manual Adjustable Product Forks
  • Powered Adjustable Product Forks
  • Automatic air powered product centering device that automatically moves the product fork to the width of the product
  • 890ST: 91″ wide x 72″ long slide table
  • 890G: 91″ wide x 69.5″ long gravity roller conveyor, rollers set on 6″ centers
  • 890GC: Same conveyor as above with polyurethane covering
  • 890P: 89″ wide x 69.5″ long powered roller conveyor, rollers set on 6″ centers
  • 890PC: Same conveyor as above with polyurethane covering
  • 890PB: 91″ wide x 72″ long powered belt conveyor
  • 890G-EZ: 91″ wide x 113″ long EZ-loader or unloader gravity roller conveyor with polyurethane covering and air lift cylinders
  • 890P-EZ: 89″ wide x 113″ long EZ-loader or unloader powered roller conveyor with polyurethane covering and air lift cylinders
  • 890PB-EZ: 91″ wide x 113″ long EZ-loader or unloader powered belt conveyor and air lift cylinders
  • Casters, Floor Locks, and Quick Disconnects for Winder
  • Torta lock swivel casters for conveyors with Quick Disconnects
  • Custom Color