Packaging Solutions Since 1978

A horizontal winder to wrap products with a maximum width of 81” and a minimum of 48” in length. Fully-Automatic variable speed wrapping ring with a 10-12” Kalamazoo variable tension film delivery , automatic film starting and cutting, air actuated hold down rollers and powered belt conveyors.  Click on the tabs below for more information.

All KPS Horizontal Winders are fully guarded with expanded metal.

Floor Layout Operator’s Manual

  Horizontal Winder:
  • Horizontal Winder: 3 hp. 230/3/60hz. v A C variable speed motor with a right angle gear reducer.
  • AC Solid state variable speed motor controller.
  • 0- 29.5 RPM, friction wheel drive
  • Floor to center of ring . 57 .0”
Film Applicator:
  • 10-12” Kalamazoo Variable Tension Film Delivery
Power Requirements:
  • 230/ 3 /60 hz. 30amp
Air Requirements:
  • 80 PSI
Wrap Cycle:
Place the product onto the infeed conveyor. Push the LOAD button. The input conveyor will come on and move the product into the Winder. The Winder ring will come on and apply the reinforcing wraps to the front edge of the product and then the conveyors will come on and wrap the product. After the product is wrapped the winder will apply the reinforcing wraps to the tail edge of the product and automatically cut the film. The output conveyor will come on and move the product out of the Winder. End of cycle.
Features:
  • Mitsubishi PLC
  • Banner sensors
  • Fully guarded
  • Kalamazoo variable tension 10-12″ film delivery
  • Automatic film starting and cutting
  • Automatic shut down when film door is open
  • Direct fraction drive
  • Computer designed for smooth running and easy maintenance
  • 20” Variable tension film delivery
  • Air powered product hold downs
  • Manual adjustable product forks
  • Powered adjustable product forks
  • Automatic air powered product centering device that automatically centers the product and move the product fork to the width of the product
  • 880ST: 81” wide x 72” long slide table
  • 880STD: 81” wide x 105” long output slide table with drop UHMW Plastic on top so window can be spun around and slid onto a cart (Please specify cart height )
  • 880STD90: 81” wide X 104” long 90 degree output slide table with drop UHMW Plastic on top so window can be spun around and slid onto a cart (Please specify cart height )
  • 880W: 81” wide x 21.5” long gravity roller conveyor with polyurethane covering on rollers
  • 880G: 81 ” wide x 69.5 ” long gravity roller conveyor , rollers set on 6” centers
  • 880GC: Same conveyor as above with polyurethane covering
  • 880P: 79” wide x 69.5” long powered roller conveyor, rollers set on 6” centers
  • 880PC: Same conveyor as above with polyurethane covering
  • 880PB: 81 ” wide x 72 ” long powered belt conveyor
  • 880G-EZ: 81” wide x 113” long EZ- loader or unloader gravity roller conveyor with polyurethane covering and air lift cylinders.
  • 880S-EZ: 81” wide x 113” long EZ- loader or unloader gravity roller conveyor with polyurethane covering and air lift cylinders. UHMW Plastic on top of upper bed so window can be spun around manually before being lowered for unloading
  • 880P-EZ: 79” wide x 113” long EZ- loader or unloader powered roller conveyor with polyurethane covering and air lift cylinders
  • 880PB-EZ: 81” wide x 113” long EZ- loader or unloader powered belt conveyor with polyurethane covering and air lift cylinders
  • Casters, floor locks, and quick disconnects for Winder
  • Total lock swivel casters for conveyors with quick disconnects
  • Custom color
<!– Video Here –!>