Packaging Solutions Since 1978

The 860FA12-PBEZ features a ergonomic Ez-Lift for heavier windows and doors, and a three belt input conveyor to allow for smaller windows. Consult the factory for various window sizes this unit will accommodate. The unit shown features manually adjusted spring hold downs with 2″ of travel. Click on the Tabs below for more information. All KPS Winders are fully guarded with expanded metal.

Floor Layout Operator’s Manual Video

Horizontal Winder:
  • 3 hp. 230 v A C variable speed motor with a right angle gear reducer.
  • AC Solid state variable speed motor controller.
  • 0- 30 RPM, friction wheel drive
  • Floor to center of ring 47 ”
Film Applicator:
  • 10-12″ Kalamazoo Variable Tension Film Delivery
Power Requirements:
  • 230/3/60 30A (This system is supplied with solid state AC drives, PLC, and sensors. A clean power source must be supplied to the system without voltage spikes or drops.)
Air Requirements:
  • 80 PSI ( Air must be clean and dry)
Description: 860FA12-PBEZ

A horizontal winder to wrap products with a maximum width of 61” and a minimum of 20 ” in length (with Product Forks option). Fully-Automatic variable speed wrapping ring with a 10-12 ” Kalamazoo variable tension film delivery, automatic film starting and cutting, spring loaded product hold downs. NEMA 12 enclosure with disconnect.

* All KPS Horizontal Winders are fully guarded with expanded metal*

Wrap Cycle:

Place the product onto the imput conveyor. Push the Start button. The input conveyor will come on and move the product into the Winder. The Winder ring will come on and apply the reinforcing wraps to the front edge of the product and then the conveyors will come on and wrap the product. After the product is wrap the winder will apply the reinforcing wraps to the tail edge of the product automatic cuts the film. The output conveyor will come on and move the product out of the Winder. End of cycle.

  • Model 860 FA-12 Fully Automatic Horizontal Winder with spring loaded product hold-downs.
  • 860PB48: 61 ” wide x 60 ” long Powered Belt Conveyor. (Input)
  • 860PB48: 61” wide x 48” long Powered Belt Conveyor. (Output)
  • 860STD: 61” wide x 115” long output Slide Table with Drop so the window can be spun around and slid onto a foot with gravity rollers so the product can roll onto a cart. (Please specify cart height)
  • Manual adjustable product forks
  • 860P-EZ: 59” wide x 60” long EZ- loader or unloader powered roller conveyor with polyurethane covering and air lift cylinders.
  • 812-SREL: 12” wide x 50” long Slide Rail EZ- Loader or Unloader with air lift cylinders. (Please specify cart height)
  • 815-PBEL: 15” wide x 50” long Powered Belt EZ- Loader or Unloader with air lift cylinders. (Please specify cart height)
  • 860STD: 61” wide x 115” long output Slide Table with Drop so the window can be spun around and slid onto a cart (Please specify cart height)
  • 480/3/60 20 a Power Requirements
  • 20” Variable tension film delivery
  • Exair Cabinet Cooler (Air must be clean and dry)
  • Electric air conditioner.
  • Air powered product hold-downs.
  • Powered adjustable product forks.
  • Automatic air powered product-centering device that automatically move the product fork to the width of the product.
  • 860PB48: 61” wide x 48 ” long Powered Belt Conveyor.
  • Custom color
<!– Video Here –!>