Packaging Solutions Since 1978

A horizontal winder to wrap products with a maximum width of 61”. Fully-Automatic variable speed wrapping ring with a 20” Kalamazoo variable tension film delivery, automatic film starting and cutting, spring hold downs. NEMA 12 enclosure with disconnect. Click the Tabs below for further information.

All KPS Horizontal Winders are fully guarded with expanded metal.

Floor Layout Operators Manual Video

  Horizontal Winder:
  • 3 hp. 230 v A C variable speed motor with a right angle gear reducer.
  • AC Solid state variable speed motor controller.
  • 0- 34 RPM, friction wheel drive
  • Floor to center of ring. 53.5”
Film Applicator:
  • 20 ” Kalamazoo Variable Tension Film Delivery with MC5.5 brake.
Power Requirements:
  • 230/ 3 /60 hz. 25amp
Air Requirements:
  • 80 PSI
Wrap Cycle: Place the product onto the input conveyor and push the Cycle Start button. Or, if the system is going to be put inline with other conveyors, a sensor will automatically turn on the input conveyor. The input conveyor will come on and convey the product into the Winder.The Winder ring will start applying the film to the front edge of the product while the conveyors come on and move the product thought the Winder. The conveyors will stop and the Winder will apply the film to the tail end of the product. The Winder will automatically cut the film as the output conveyor comes back on to convey the product out of the Winder. End of cycle. Features:
  • Mitsubishi PLC
  • Banner sensors
  • Fully guarded
  • Kalamazoo variable tension 20 ” film delivery
  • Automatic film starting and cutting
  • Automatic shut down when film door is open
  • Direct fraction drive
  • Computer designed for smooth running and easy maintenance
  • 860PB48: 61 ” wide x 60 ” long Powered Belt Conveyor. (Input)
  • 860PB48: 61” wide x 48” long Powered Belt Conveyor. (Output)
  • 860STD: 61” wide x 115” long output Slide Table with Drop so the window can be spun around and slid onto a foot with gravity rollers so the product can roll onto a cart. (Please specify cart height)
  • Manual adjustable product forks
  • 860P-EZ: 59” wide x 60” long EZ- loader or unloader powered roller conveyor with polyurethane covering and air lift cylinders.
  • 812-SREL: 12” wide x 50” long Slide Rail EZ- Loader or Unloader with air lift cylinders. (Please specify cart height)
  • 815-PBEL: 15” wide x 50” long Powered Belt EZ- Loader or Unloader with air lift cylinders. (Please specify cart height)
  • 860STD: 61” wide x 115” long output Slide Table with Drop so the window can be spun around and slid onto a cart (Please specify cart height)
  • 480/3/60 20 a Power Requirements
  • 20” Variable tension film delivery
  • Exair Cabinet Cooler (Air must be clean and dry)
  • Electric air conditioner.
  • Air powered product hold-downs.
  • Powered adjustable product forks.
  • Automatic air powered product-centering device that automatically move the product fork to the width of the product
  • 860PB48: 61” wide x 48 ” long Powered Belt Conveyor.
  • Custom color
<!– Video Here –!>