Packaging Solutions Since 1978

The KPS Series of fully-automatic stretch wrap systems are designed for high volume, heavy-duty operation with no operator involvement required. The fully-automatic wrap cycle allows the operator to complete other tasks during the wrap process, leading to a decrease in labor costs and an increase in productivity.

Floor Layout Operator’s Manual(.pdf) Video

Specification Value
Turntable Capacity 4000 lbs
Turntable Speed 10 RPM
Turntable Height 18”
Turntable Disc Size 80-1/2” Dia. Disc, 5” Skirt
Conveyors 2-1/2” Dia. X 11ga. Roller set on 4-1/4” centers.
Turntable Drive 1/2 HP; Direct friction drive
Film Carriage Drive 1/2HP; Belt
Space Requirements 80-1/2” Wide x 120-1/4” Long
Maximum Pallet Size 48” wide x 48” long x 84” tall
Maximum Wrap Height 84”
Film Web 20”
Power Requirements 480/3/60hz. 40 AMP.
Shipping Weight 1600 lbs
  • Fully-Automatic stretch wrap system with powered roller conveyors.
  • Mitsubishi PLC controls all wrap functions.
  • Banner photo-eye load height sensor.
  • Baldor motors
  • Boston gearboxes
  • Telemecanique drives
  • NEMA 12 dust/oil tight enclosure
  • Tough urethane enamel paint. (Light Gray)
  • Will accommodate loads up to 4,000 lbs.
  • 3/4 hp. Variable speed Baldor AC turntable drive motor with Telemecanique solid state AC controller.
  • 1/2 hp. Variable speed Baldor AC film carriage drive motor with Telemecanique solid state AC controller.
  • Adjustable top and bottom limit switches
  • 6”x 2” Swivel caster with tapered roller bearing, extra wheel under the disc for antitip.
  • Faster and easier then wrapping by hand.
  • 4FAC51 Fully-Automatic will accommodates varying load height.
  • Automatic film starting and cutting.
  • 20” Kalamazoo powered prestretch film delivery.
  • 80-1/2” Diameter disc.
  • Conveyor; 2-1/2” Dia. x 11ga. Rollers set at 4-1/4” centers.
  • Fork lift portability for easy placement throughout any facility.
  • Most replacement parts can be obtained through any W.W. Grainger, Locations Nationwide.
  • Limited lifetime warranty on all KPS Manufactured components.
  • Printer with 2″ x 4″ labels 140 per roll (1 case 10 rolls)
  • Modicon PLC and Telemecanique drives
  • Extra height for 100” loads
  • 4,000 lb. built in scale
  • Top platen load stabilizer
  • Self contained air supply 10amp.
  • Epoxy paint or Custom color