The 800 SAA stand alone automatic horizontal pallet wrapper is available in various sizes and automatically wraps pallets horizontally. The available models are the 850, 860, 870, and 880. The 870 has a 70″ x 70″ Cage Opening to allow for larger loads. Click the tabs below for more information on this unit. Floor Layout (.pdf) Operator’s Manual (.pdf) Video
Horizontal Winder: 870SAA 3 hp. 230v AC variable speed motor with a right angle gear reducer. AC Solid state variable speed motor controller. 0-29 RPM, friction wheel drive. Floor to center of ring: 57.0”. Film Applicator: 20” Kalamazoo Variable Tension Film Delivery. Film Door: All KPS units utilize an interlock door switch to prevent access while the ring is in motion. Power Requirements: 230/1-3/60 hz. or 480/3/60 hz.
800 SAA Description: A free standing Fully-Automatic Horizontal Winder Stretch Wrapper to wrap loads using a standard fork truck. Variable speed wrapping ring with solid state AC drive. 20” Kalamazoo variable tension film delivery. Automatic film starting and cutting. All KPS Horizontal Winders are fully guarded with expanded metal. Wrap Cycle: Bring the load to the winder with a fork truck. When the load is positioned in the winder the yellow light will come on and start flashing after a preset time. The winder will automatically start wrapping the load. Use the fork truck to slowly move the load in. After the load is wrapped, use the pull cord to start the automatic film cutting. After the film is cut, the yellow light will stay on for a preset time so the same load does not get wrapped again. After the yellow light goes off, the system is reset. End of wrap cycle.
- Accommodates loads with varying lengths.
- Automatic film starting.
- Automatic film cutting with remote Keyfob.
- 20” Variable tension film delivery
- Mitsubishi PLC controls all wrap functions
- Telemecanique AC drives.
- Banner sensor and Photo-eyes.
- Winder ring Auto/Manual
- 870SAA Maximum load 62” wide x 62” high. Other sizes available.
- Limited Lifetime warranty on all K.P.S manufactured components.
- Model 870SAA-20 Stand Alone Automatic Horizontal Winder Stretch Wrap System
- Casters, floor locks, and quick disconnects for winder
- Power requirements 480/3/60 12 amp
- Custom color
<!– Video Here –!>