Packaging Solutions Since 1978

The Kalamazoo 4000M-SAC is a Cold Room Semi-Automatic Spiral Stretch Wrap System with a Photo-eye Load Height Sensor. It is designed to be placed in a cold room or freezer. It wraps pallets with the push of a button. System comes with heated control cabinet and lightweight synthetic gear oil in the Turntable and Film Lift gear reducers. The unit can be ordered either Semi-Automatic or a Powered Manual Model. Click here for financing info Floor Layout Operator’s Manual(.pdf)

Specification Value
Turntable capacity 4000 lbs
Turntable speed 0-12 rpm
Turntable height 4 3/4″
Turntable size 48″ dia
Turntable drive 1/2 HP; chain
Film carriage drive 1/2 HP; belt
Space requirements 48.5″x96″
Optional ramp 40″ Wide X 50″ Long
Maximum diagonal pallet size 75″
Maximum wrap height 84″
Film web 20″
Power requirements 115/1/60 15A
Shipping Weight 950 lbs.
  • Semi Automatic: Attach the film. Push the (Start) button. The system will automatically wrap the product.
  • Mitsubishi PLC controls all wrap functions
  • Banner photo-eye load height sensor.
  • Tough urethane enamel paint. (Light Grey)
  • Turntable Auto/Manual, Film carriage Raise/Lower
  • Will accommodate loads up to 4,000 lbs.
  • 4000M-SA Semi-Automatic Spiral accommodates varying load heights
  • 1/2 hp. Variable speed AC turntable drive motor with solid state AC controller
  • 1/2 hp. Variable speed AC film carriage lift motor with solid state AC controller
  • Adjustable top and bottom limit switches
  • 20″ Kalamazoo Constant Prestretch Film Delivery
  • Machine designed so it can be shipped with a built in scale or the scale can be added later.
  • 48″ diameter nonskid floor plate disc. (Other sizes available)
  • Can be loaded by fork lift or pallet jack. (when used with optional ramp.)
  • Fork lift portability from both ends allows for easy placement throughout any facility
  • Most replacement parts can be obtained through any WW Grainger, locations nationwide.
  • Limited lifetime warranty on all K.P.S. manufactured components.
  • 30” Constant Prestretch Film Delivery
  • 20” Variable Tension Film Delivery
  • 30” Variable Tension Film Delivery
  • 20” Powered Prestretcher Film Delivery
  • 30” Powered Prestretcher Film Delivery
  • Automatic film cut off can be added to variable tension and powered prestretch
  • NEMA 12 dust/oil tight enclosures
  • Allen Bradley Micrologix PLC and Flex4 Drives
  • Ramp
  • Ramp for scale equipped machines
  • Ramp for Powered Walkie 84” long
  • Extra Length (for larger loads)
  • Extra Height (110” tall loads) with Detachable tower for shipping by common carrier
  • 4,000 lbs. Built In Scale
  • Printer w/ 2”x 4” labels 140 per roll. (1 case 10 rolls)
  • 60” x 3/8” FL. PL. Turntable Disc
  • 72” x 3/8” FL. PL. Turntable Disc
  • 72” x 3/8” FL. PL. Turntable Disc with Scale
  • 84”x 3/8” FL. PL. Turntable Disc
  • 84”x 3/8” FL. PL. Turntable Disc with Scale
  • Power Requirements 200-240/3/50-60hz. 10AMP.
  • Epoxy paint, Custom color
4000M Warranty Effective on all machines built January 1, 2007 and later Your investment ensures that your products will arrive at their destination cleaner, with less damage and pilferage and at a lower cost to you. Kalamazoo Packaging Systems, Inc. (KPS) agrees to furnish the purchaser without charge (up to $1000.00), F.O.B. the factory, any part found to be defective in either material or workmanship within five (5) years from date of shipment, provided the purchaser gives immediate notice of any defect and description of that defect to KPS. KPS reserves the right to inspect any defective part to verify the defect and to determine probable cause of same. The liability of KPS under this warranty is limited to furnishing replacements for defective parts, and unless otherwise agreed to in writing, the purchaser shall bear the expense of installation. Failure of equipment or parts due to abuse, misuse, neglect, incorrect operating techniques or power line drops or surges shall not constitute failure because of defective material or workmanship, and are expressly excluded from this warranty. This system is supplied with solid state AC drives, PLC, and sensors. A clean power source must be supplied to the system without voltage drops or spikes. The above is the only warranty with no other guarantees which extend beyond the above and the seller disclaims any implications including but not limited to a warranty of merchantability.