Packaging Solutions Since 1978

This powered manual system is used to band a small products. The unit shown uses a foot switch for on/off operation. The units size can be modified to whatever product dimensions are required.  Click on the Tabs below for further information.

This system is used to band a small product on one end.

815PMB5 Powered Manual Bander Horizontal Winder Stretch Wrapper w/ 5″ Variable Tension

Description:

A Powered Manual Bander Horizontal Winder to wrap products with a maximum width of 15 inches and a maximum height of 6 inches. Foot switch operated variable speed wrapping ring with a 5″ Kalamazoo variable tension film delivery. All KPS Horizontal Winders are fully guarded with expanded metal.

Wrap Cycle:

Place the product onto the Winder. Secure the film and push down on the foot switch. After the product is banded, let off the foot switch and cut the film. Remove the product. End of cycle.

Specifications:

Horizontal winder:

  • 1hp. 230v. AC TENV motor with a right angle gear reducer.
  • Solid state variable speed controller
  • 0-80 RPM, friction wheel drive
  • Floor to center of ring = 42 1/2″

Film Applicator:

  • 5″ Kalamazoo Variable Tension Film Delivery

Power Requirements:

  • 230/3/60hz.

815PMB5 (Banding Wrapper) Wrap Cycle:

Place the product onto the Winder. Secure the film and push down on the foot switch. After the product is banded, let off the foot switch and cut the film. Remove the product. End of cycle.

Features:

  • Fully Guarded
  • 5″ Kalamazoo Variable Tension Film Delivery
  • Maximum Product Width: 15″
  • Maximum Product Height: 6″
Model 815PMB5 Powered Manual Bander Horizontal Winder Stretch Wrapper
Casters, Floor Locks, and Quick Disconnects for Winder
Custom Color