830 PMV DESCRIPTION: A horizontal winder to wrap products with a maximum diagonal of 12” and a minimum of 24” in
length with the product hold down on the inside of the frame. Foot or selector switch operated. Variable speed
wrapping ring with a 10-12” Kalamazoo variable tension film delivery and manually adjustable product hold downs.
|
| All KPS Horizontal Winders are fully guarded with expanded metal. |
Wrap Cycle: Place the product onto the infeed conveyor or slide table. Move the product into the winder. Once the
product is loaded into the winder and the film is secured, push down on the foot switch or turn the WINDER
selector switch to on. After the reinforcing wraps are applied turn on the CONV. FORWARD switch or slide the
product though the winder. Turn off the conveyor and place the reinforcing wraps on the end of the product . Turn
off the winder. The operator will now cut and secure the film. End of cycle.
|
| Specification: |
Horizontal Winder:
|
- 1 hp. 230v AC TENV motor with a right angle gear reducer.
|
- Solid state variable speed controller.
|
- 0-50 RPM, friction wheel drive.
|
- Floor to center of ring 42.25”.
|
Film Applicator: 10-12” Kalamazoo Variable Tension Film Delivery.
|
With 12” film at 50 RPM. This system will wrap 33.3 FPM |
With 20” film at 50 RPM. This system will wrap 62.5 FPM |
