| 860 FA20-60 PBRC120 Specifications |
Description:
|
A horizontal winder to wrap products with a maximum width of 61” and a minimum of 50” in length. Fully-Automatic variable speed wrapping ring with a 20” Kalamazoo variable tension film delivery, automatic film starting and cutting, 60” Long air powered product hold downs 4” dia. with 1” foam rubber. 60” Wide x 120” long powered belt gravity roller conveyors. NEMA 12 enclosure with disconnect. All KPS Horizontal Winders are fully guarded with expanded metal.
|
Horizontal Winder:
|
-
3 hp. 230 v A C variable speed motor with a right angle gear reducer.
|
- AC Solid state variable speed motor controller.
|
- 0- 34 RPM, friction wheel drive
|
- Floor to center of ring . 53.5”
|
Conveyors:
|
- 60” wide x 120 ” long powered belt gravity roller bed conveyor . 2 hp. 230 v AC
|
- Variable speed motor with a right angle gear reducer.
|
- AC Solid state variable speed motor controller. Center drive reversible
|
- 2-1/2” dia. x 11ga. Gravity
rollers set on 6” centers, 3” dia. end idler rollers, 4” dia. Drive roller
|
- Height floor to top of conveyor bed 48.0”
|
Film Applicator:
|
- 20 ” Kalamazoo Variable Tension Film Delivery with MC5.5 brake.
|
Power Requirements:
|
- 230/3/60 hz. 20amp ( This system is supplied with solid state AC drives, PLC, and sensors. A clean power source must be supplied to the system without voltage spikes or drops.)
|
Air Requirements:
|
- 80 PSI ( Air must be clean and dry)
|
